620-M8-Quiz4
Exam Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the exam before. Hence you can not start it again.
Exam is loading…
You must sign in or sign up to start the exam.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
What is the condition for a Class 2 assembly that has a prewoven braid with braid overlap of 2 diameters of the largest bundle at breakouts and branches?
CorrectIncorrect -
Question 2 of 10
2. Question
What is the condition for a Class 1 assembly that has a shield jumper wire with evidence that the shrink sleeve does not conform to the contour of the lead and cable?
CorrectIncorrect -
Question 3 of 10
3. Question
What is the condition for a Class 3 assembly that has a shield jumper wire that’s daisy chained with shield terminations staggered within the specified design limits from end of wire?
CorrectIncorrect -
Question 4 of 10
4. Question
What is the condition for a Class 3 assembly that has an unterminated shield not folded back with a split in the sleeving?
CorrectIncorrect -
Question 5 of 10
5. Question
What is the condition for a Class 3 assembly that has a shield termination connector with evidence that the shield jumper wire is not within the envelope dimension of the connector?
CorrectIncorrect -
Question 6 of 10
6. Question
What is the condition for a Class 2 assembly that has a prewoven shield termination splice that has evidence of a solder fillet present around the entire shield overlap area but still allows for shield flexibility?
CorrectIncorrect -
Question 7 of 10
7. Question
What is the condition for a Class 3 assembly that is secured using tape overlapping with a width of 20% tape width?
CorrectIncorrect -
Question 8 of 10
8. Question
What is the condition for a Class 2 assembly with prewoven braid that is free of pulled loops and free of ballooning?
CorrectIncorrect -
Question 9 of 10
9. Question
What is the condition for a Class 3 assembly with shrink tubing that shows evidence of charring?
CorrectIncorrect -
Question 10 of 10
10. Question
What is the condition for a Class 3 assembly with shrink sleeving that is missing the sealant when it is required?
CorrectIncorrect