620-M7-Quiz3

620-M7-Quiz3

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 1 biaxial cable assembly with slight coloration in the dielectric due to thermal stripping?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 3 coaxial cable assembly that has a conductor strand not captured in the terminal?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 1 coaxial cable assembly that has a solder ferrule pin with disturbed twist of the center conductor?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 2 coaxial cable assembly that has a shield termination with ground strands holding the shield ground ring in tight contact with the cable outer jacket?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 3 coaxial cable assembly that has a semirigid coaxial cable of nominal diameter 0.141 inches but has been deformed with eccentricity limits of 0.135 inches in the minor axis and 0.148 inches in the major axis?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 3 coaxial cable assembly that has a semirigid coaxial cable with center conductor pin that shows evidence of light, minor blemishes in the plating due to a test mating?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 3 coaxial cable assembly that has a semirigid coaxial cable with a 330 degrees solder fillet?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 coaxial cable assembly that has a swage-type connector with 0.25mm gap between the ferrule shoulder and nut face?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 3 coaxial cable assembly that has a semirigid conformable coaxial cable with no voids in the solder coating?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 3 coaxial cable assembly that has a coaxial connector with pinholes in the center conductor solder?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect