620-M7-Quiz2

620-M7-Quiz2

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 3 biaxial cable assembly with a shielded wire that after stripping has its shield and jacket extending 60% over the cone?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 2 coaxial cable assembly that has a semirigid coaxial cable with center conductor pin damage of 15% its diameter?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 3 coaxial cable assembly that has a semirigid coaxial cable that underwent dielectric removal resulting in a trim area offset of 10% of the cable diameter beyond the perpendicular angle to the center conductor?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 1 coaxial cable assembly that has a semirigid coaxial cable with minor tooling marks on the outside surface?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 2 coaxial cable assembly that has scrapes across 5% of the center pin surface area and exposes basis metal?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 3 coaxial cable assembly that has a coaxial connector with a solder fillet of 340 degrees around the connector body and cover?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 2 coaxial cable assembly that has a right-angle coaxial connector with the dielectric extending into the connector cavity and touching the slotted terminal?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 3 biaxial cable assembly that has a solder ferrule pin with insulation in the inspection hole protruding beyond the pin surface preventing contact mating?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 3 biaxial cable assembly that has solder filling the inspection window but not interfering with assembly operations?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
True or False: For plated wires within coaxial and biaxial cable assemblies, it is not considered strand damage if basis metal is not exposed.
- True
- False
Correct

Incorrect