620-M6-Quiz4

620-M6-Quiz4

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 3 assembly that has cured adhesive on a grommet that does not require sealing?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 1 assembly that has a tinned stranded wire wrapped 180 degrees around a screw head in the wrong direction?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 1 assembly that has improperly installed hardware?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 2 assembly that has no damage to the raceway’s metallic and non-metallic components?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 3 assembly that has a solid wire wrapped 210 degrees around a screw head in the correction direction and no insulation in the contact area?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 3 assembly with coaxial cables secured with spot ties that cause cable deformation?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
True or False: A harness bundle’s minimum bend radius can be less than the minimum bend radius of the largest wire/cable in the bundle.
- True
- False
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 3 assembly that has an irregularly spaced restraining device?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has a marking present on an exposed (uninsulated) conductor in a region where the connector will connect to a mating surface?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a restraining device that moves longitudinally?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect