620-M6-Quiz3

620-M6-Quiz3

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 1 assembly that has a marking with incorrect content?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 2 assembly that has a marking sleeve that is misaligned but still remains legible and does not affect subsequent assembly steps?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
True or False: Beeswax impregnated lacing tape shall not be used for Class 3 assemblies.
- True
- False
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 2 assembly with the first restraining device spaced 4 bundle diameters from a breakout?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 1 assembly with shrink sleeving extending over an unused wire for 5 wire diameters and the unused wire is tied back into the wire bundle?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 1 assembly with jackscrews that do not bottom out in the jackposts before the connectors are fully mated?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 3 assembly that has evidence of nicks on a safety lock wire?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly that has a wire formed around the terminal opposite to the feed-in direction and is not supported to prevent stress at the solder connection?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has cables not properly secured at entry and exit points of the raceway?
- Acceptable
- Process Indicators
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 3 assembly with spot ties placing stress on wires exiting a splice?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect