620-M6-Quiz2

620-M6-Quiz2

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 3 assembly that has a cable with insulation not adhering to the sealing feature of the grommet that requires sealing?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 2 assembly that has filler rods located on the gap side of the clamp?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 1 assembly that has insufficient stress relief at the terminal?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 2 assembly that has a safety cable extending beyond the crimped ferrule 0.85mm?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 3 assembly that has tight fasteners and fully compressed split-ring lock washers?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
True or False: Threaded fasteners that used locking compounds may be reused without cleaning.
- True
- False
Correct

Incorrect
Question 7 of 10

7. Question
What is the minimum bend radius required for an 8 AWG unshielded cable in a Class 3 assembly?
- 1X
- 2X
- 3X
- 5X
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly with continuous lacing that does not use a double lock stitch for breakouts of 4 or more wires?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has a temporary holding device not removed prior to completion?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a marking that is blurred but still legible?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect