620-M5-Quiz3

620-M5-Quiz3

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 3 assembly that has a weld nugget with individual wires not distinguishable on the top and bottom compression surfaces of the nugget?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
For Class 3 products, splices shall not be placed where? (select all that apply)
- Within 3 harness diameters of a breakout
- Within 2 harness diameters of a breakout
- In areas not exposed to tension, flexure, or other stresses
- In areas exposed to tension, flexure, or other stresses
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 2 assembly that has a mesh splice with conductor strands interlocked 2 wire diameters?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 1 assembly that has a lap splice with a smaller diameter wire overwrapped in accordance with the engineering drawing?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 2 assembly that has a lap splice insulation opening (window) that is shorter in length than the stripped portion of the pickoff wire?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 2 assembly that has a heat shrinkable solder device with solder flowing beyond the meltable sealing rings?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 3 assembly that has a barrel crimp splice with conductor ends extending 1.5 wire diameters beyond the crimp barrel?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly that has a barrel crimp splice that is cracked?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has a barrel crimp splice insulation opening (window) that is slightly larger than the stripped portion of the pickoff wire?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
True or False: Sealing plugs for wire-in line junction devices (Jiffy Junctions) are required to be inserted shaft first.
- True
- False
Correct

Incorrect