620-M5-Quiz2

620-M5-Quiz2

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 1 assembly that has insulation embedded in the weld nugget?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
Which Class of product requires splices to be staggered within specified design limits?
- Class 1
- Class 2
- Class 3
Correct

Incorrect
Question 3 of 10

3. Question
True or False: Stranded wires shall always be tinned for Class 2 product when wires will be formed into any splice.
- True
- False
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 3 assembly that has a hook splice with an insufficient solder fillet?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 2 assembly that has a lap splice with conductors not parallel to each other?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 3 assembly that has a heat shrinkable solder device with a solder preform centered over the splice and fully melted to form a fillet joining both wires?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 1 assembly that has a barrel crimp splice insulation opening (window) that is slightly larger than the stripped portion of the pickoff wire?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly that has a doubled sided crimp splice with wire insulation clearance of 1.5 wire diameters at each end?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 2 assembly that has an unsealed end splice sleeving extending 1.5 wire group diameters beyond the cut end?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a lash splice?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect