620-M2-Quiz5

620-M2-Quiz5

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 1 assembly that has a discrete wire termination insulation displacement connection with contact basis metal exposed on the Subminiature D-Connector?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 3 assembly that has a discrete wire termination insulation displacement connection with the wire length past the electrical (second) contact of 25% overall wire diameter?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 2 assembly that has shrink sleeving tight on the crimp device but not tight on the wire?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 2 assembly that has a crimped machine contact with insulation 1.5 wire diameters from the end of the contact barrel?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 3 assembly that has a closed barrel stamped and formed crimp termination with an insulation support crimp that has been irregularly shaped but it still is secure to the terminal providing support?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 1 assembly that has an open barrel stamped and formed crimp termination with insulation crimp tabs encircling the wire, but leaves a 60-degree opening at the top?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 3 assembly that has an open barrel stamped and formed crimp termination with the individual wire seal end visible in the insulation inspection window?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly that has a crimped machine contact with a circular mil area (CMA) buildup filler conductor visible in the inspection window of the contact?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has a mass termination insulation displacement connection with the flat cable extending 1.5 thicknesses beyond the edge of the connector?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a discrete wire termination insulation displacement connection with corrosion damage on the surface of the slot?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect