620-M1-Quiz1

620-M1-Quiz1

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the primary or precedent language for using the IPC/WHMA-A-620 standard?
- Whatever language the IPC/WHMA-A-620 standard is published in.
- English
- French
- Spanish
Correct

Incorrect
Question 2 of 10

2. Question
Who has the responsibility to define the class of an assembly?
- Manufacturer
- Buyer
- Supplier
- User
Correct

Incorrect
Question 3 of 10

3. Question
What word is used to identify a requirement?
- Will
- Should
- Shall
- Mandate
Correct

Incorrect
Question 4 of 10

4. Question
Which Class of hardware requires a documented process control system with methodologies to be used during planning, implementation, and evaluation of manufacturing processes for producing cables and wire harness assemblies?
- Class 1
- Class 2
- Class 3
Correct

Incorrect
Question 5 of 10

5. Question
What is the allowable tolerance when using magnification to inspect wires and wire connections?
- +/- 5%
- +/- 10%
- +/- 15%
- +/- 0%
Correct

Incorrect
Question 6 of 10

6. Question
If you are inspecting an assembly with both 18 AWG and 24 AWG wires, what inspection range can you use for the entire assembly?
- N/A
- 1.5X-3X
- 3X-7.5X
- 10X
Correct

Incorrect
Question 7 of 10

7. Question
True or False: A manufacturer is required to inspect, clean, and maintain authorized tools and equipment, as well as prohibit all unauthorized tools and equipment from being in the work area.
- True
- False
Correct

Incorrect
Question 8 of 10

8. Question
Which IPC document is used to document terms and definitions for interconnecting and packaging electronic circuits?
- IPC-AJ-820
- IPC-T-50
- IPC-WP-116
- IPC-9191
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 3 assembly that has a length of lay of 16 times the outer diameter of the wire bundle?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a requirement for 5 meter (m) cable that measures 4.99 m?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect