0 of 10 Questions completed
You have already completed the exam before. Hence you can not start it again.
Exam is loading…
You must sign in or sign up to start the exam.
You must first complete the following:
0 of 10 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
What is the condition for a Class 1 assembly that has a swaged terminal that is not stable vertically?
True or False: Rolled flange terminals may be soldered to a land or installed onto active circuitry.
What is the condition for a Class 1 assembly that has a wire not yet soldered with insulation thickness reduced by 15%?
What is the condition for a Class 3 assembly that has a 20 strand wire with 3 nicks that will be tinned prior to installation?
What is the minimum bend radius for a Class 3 assembly with unshielded polyimide insulated wire?
What is the condition for a Class 2 assembly that has a terminal altered to accept an oversized wire?
What is the condition for a Class 2 assembly that has a 30 AWG wire wrapped 270 degrees around a terminal?
What is the condition for a Class 2 assembly that has a 10 strand wire with 1 nick that will be used a potential of 6kV and greater?
What is the condition for a Class 3 assembly with wire sleeving that overlaps the insulation by 3.5 wire diameters and is tight on both the terminal and wire?
True or False: Fraying of wire insulation with a fiberglass barrier is considered a defect.