610-M4-Quiz 1

610-M4-Quiz 1

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
What is the condition for a Class 2 assembly that has a swaged turret terminal with a top edge bent beyond the edge of the base?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
How many circumferential splits or cracks on a rolled flange terminal are allowed on a Class 2 assembly for it to be acceptable?
- 0
- 1
- 2
- 3
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 3 assembly that has a 50 strand wire with 3 nicks that will not be tinned prior to installation?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
True or False: Bend radius is measured along the outside curve of the wire or wire bundles.
- True
- False
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 3 assembly that has a wire with excess solder from tinning, but it does not affect form, fit, or function?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition for a Class 1 assembly with a wire that is straight between connections and without loops or bends, but is not taut?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 2 assembly when a lead is not discernible in a soldered connection?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 3 assembly when a bottom routed wire is wrapped 120 degrees around a bifurcated terminal?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has wires not fully inserted into a solder cup?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 3 assembly that has a series connected bus bar connecting 4 bifurcated terminals without stress relief between the middle terminals?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect