610-M3-Quiz 2

610-M3-Quiz 2

Time limit: 0

Exam Summary

0 of 10 Questions completed

Questions:

Information

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
True or False: Conformal coating coupons are required to be of the same material type as the printed board.
- True
- False
Correct

Incorrect
Question 2 of 10

2. Question
What is the condition for a Class 3 assembly that has a fingerprint visible within no clean flux residue?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 3 of 10

3. Question
What is the condition for a Class 2 flexible printed board that has no evidence of wetting solder in adjacent plated holes?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 4 of 10

4. Question
What is the condition for a Class 1 assembly that has a reduction in conductor width of 25%?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 5 of 10

5. Question
What is the condition for a Class 1 assembly that has a twist which causes damage during assembly operations?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 6 of 10

6. Question
What is the condition called that results in a light area in the base material around holes?
- Blistering
- Delamination
- Haloing
- Crazing
Correct

Incorrect
Question 7 of 10

7. Question
What is the condition for a Class 3 assembly that has crazing of 45% of the physical spacing between noncommon conductors and doesn’t reduce spacing below minimum electrical clearance?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 8 of 10

8. Question
What is the condition for a Class 2 assembly that has contamination in the critical contact area?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 9 of 10

9. Question
What is the condition for a Class 1 assembly that has a ferrite core with cracks in the core?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect
Question 10 of 10

10. Question
What is the condition for a Class 2 assembly that has a connector with slight discoloration?
- Acceptable
- Process Indicator
- Defect
- Not Established
Correct

Incorrect