610-M1-Quiz 6

Exam Summary

0 of 10 Questions completed

Questions:

You have already completed the exam before. Hence you can not start it again.

Exam is loading…

You must sign in or sign up to start the exam.

You must first complete the following:

Results

Exam complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
Criteria for each class is provided within IPC-A-610 using which conditions? (select all that apply)
- Acceptable
- Defect
- Combined
- Process Indicator
- Not Established
Correct

Incorrect
Question 2 of 10

2. Question
True or False: An IPC-A-610 certificate is the only requirement to inspect electronic assemblies.
- True
- False
Correct

Incorrect
Question 3 of 10

3. Question
Which document contains requirements for protecting electronic assemblies from Electrostatic Discharge (ESD)?
- MIL-STD-1130
- ECA/IPC/JEDEC J-STD-075
- ANSI/ESD-S-20.20
- MIL-STD-2073
Correct

Incorrect
Question 4 of 10

4. Question
What’s the difference between conductor diameter and strand diameter?
- Conductor diameter includes all strands, whereas strand diameter is for a single filament
- Conductor diameter includes all strands and insulation, whereas strand diameter is for a single filament
- Conductor diameter includes all strands, whereas strand diameter is for multiple filaments
- Conductor diameter includes all strands and insulation, whereas strand diameter is for multiple filaments
Correct

Incorrect
Question 5 of 10

5. Question
True or False: An inspector can select the class of product to inspect to.
- True
- False
Correct

Incorrect
Question 6 of 10

6. Question
Which document may be used as a guide for designing and selecting a conformal coating?
- IPC-CH-65
- IPC-HDBK-830
- IPC-CM-770
- IPC-SM-840
Correct

Incorrect
Question 7 of 10

7. Question
Which statement is true regarding wire overlap and wire overwrap?
- Wire overlap is when a wire has a greater than 360° wrap, crosses over itself, and is not in contact with the termination; wire overwrap is when a wire has a greater than 360° wrap that remains in contact with the termination.
- Wire overwrap is when a wire has a greater than 360° wrap, crosses over itself, and is not in contact with the termination; wire overlap is when a wire has a greater than 360° wrap that remains in contact with the termination.
- Wire overlap is when a wire has a greater than 360° wrap, crosses over itself, and is not in contact with the termination; wire overwrap is when a wire has a less than 360° wrap that remains in contact with the termination.
- Wire overwrap is when a wire has a greater than 360° wrap, crosses over itself, and is not in contact with the termination; wire overlap is when a wire has a less than 360° wrap that remains in contact with the termination.
Correct

Incorrect
Question 8 of 10

8. Question
What is the correct order of precedence if conflicts arise?
- Drawing
- When invoked by User
- Procurement documentation
View Answers:
Correct

Incorrect
Question 9 of 10

9. Question
Which of the following are examples of typical static charge sources? (select all that apply)
- ESD shoes
- Compressed air
- Styrofoam
- Carpeting
- ESD totes
- Non-ESD trays
Correct

Incorrect
Question 10 of 10

10. Question
Who defines the specific combined conditions that may be a concern based upon the end use environment?
- Supplier
- Assembler
- Manufacturer
- User
Correct

Incorrect

610-M1-Quiz 6

610-M1-Quiz 6

Exam Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question